Excellence comes from unremitting management innovation and technological innovation
Home > Product > Load series
Position
Load Testing(TRA)
The dry-type load bank is the electrical energy load testing equipment which our company self research and develop: operate easily, small volume, convenient transportation,visible loading capacity, regulating the capacity according to the shunt resistance pile electric circuit. The adjustment of the loading capacity has manual control and computer control.Compared with the traditional water load and resistance load bank, it doesn't have the leakage, don't product 
the noxious gas and the waste water. The load test precision is high, the adjustment is easier, don't need to test the setup time,can continuously the long-time use and so on many superiorities. Our company lot product the three-phase AC dry-type load bank which has voltage classes: high voltage 10KV, 6.6KV,3.3KV and low voltage 690V, 400V, 200V and DC12V, 36V, 48V and so on.Power factor can regulate from 0-1.0, low voltage three-phase AC 400V load 
bank can test three-phase 400V and three-phase 200V, single-phase 220V and 110V voltage classes. The high-voltage load bank doesn't need test for the high-voltage directly test (not to need transformer),therefore the volume is smaller,the survey is more convenient and more accurate.

Detail

  Application for load bank

  • The load bank is an ideal test equipment for generator power, the frequency, the voltage,the current, power factor and other generator parameters. Most of the generator use the diesel oil,which can cause the fuel oil unfilled,carbon deposition, complete machine efficiency reduced when the diesel oil load is lower than 50% or in idling situation for a long time and even cause starting difficulty, power insufficiency, oil consumption increased,finally,opening the cylinder for maintenance too early and the abandonment ,so the load bank will be generator's ideal false load.


■  执行标准

       @ Intemational standard:IS0 8528-5:1993《Reciprocating intemal combustion altemator.Part5:Generating set.》 
       @ National standard:GB/T 2820.5-1997 《Reciprocating intemal combustion altemator.Part 5 Generating set.》 
       @ National standard:GB/T 13032- 1991 《General technical condition for Marine Diesel Generator Set. 》 
       @ National standard: GB/T 14048.1-2000 《Low-voltage Switchgear and Controlgear.)
       @ Industry standard: JB/T 10303-2001 《Technical condition for Diesel Generating set.》
       @ Industry standard:JB/T 9696.1-1999 《Connecting terminals for Low-voltage Switchgear and Controlgear》


■   Product Parameters

■  Product Identification Code

            
Prev:Inductance
Focus news
Contact us
 

Tel: 021-37701209
Email: sales@howcore.com
Website: http://www.howcore.com
Address: Building 13, No. 3129, Shenzhuan Road, Songjiang, Shanghai


Scan QR codeClose